541 Ethertype for GOOSE

Created
03 Jul 2007
Status
In Force (green)Closed: the solution is part of the standard. No further comments are taken. Show the workflow
Part
Part 8-1 (2004)
Links
None
Page
19
Clause
5.1
Paragraph
Category
Issue for edition 2 of this part

Issue

"Messages of Type 1 and Type 1A are mapped to distinct Ethertypes to optimise decoding of received messages." (61850-8-1) In annex C, table C.2 is defined only one GOOSE ethertype. For optimization of performance it would be better to seperate Goose Trip from other Goose messages.

Proposal

Include in table C.2 a special ethertype only used by Goose trip messages. Alternative it can be defined different ranges for APPID.

DiscussionCreated
In Force (green) turned to green. 26 Mar 08
Ballot Period Fastmessage GOOSE (from part 5) will have the Most significant byte of the Ethertype APPID set to a value of zero.

Trip GOOSE will have a value of 0x02 in the most significant byte of the Ethertype APPID.
14 Dec 07
Discussion (red) There is no need for a distinct Ethertype. Faster sending is assured by higher priority, not by Ethertype. Separate filtering can be assured by different APPID or Multicast addresses. I suggest to make clear that 'distinct' refers to SAV, and not to different types of GOOSE. 28 Sep 07