778   AdCause values

This tissue has following status: green

Created: 29 Sep 2011

Links:

Page: 170

Clause: 20.5.2.9

Paragraph: Tables 53 and 54

Category: Issue may impact interoperability of implementations of Edition 2

Issue: Value "not-supported" is missing

Proposal: Add the value "not-supported" to both tables.

Discussion Created Status
?
Ballot until Editor
02 May 12 green
Accepted.
AddCause not supported is used in Table 47 and declared in Annex B.2. However it is missing in table 53 and table 54.
The correct addCause enumeration value for 7-2 are:
<EnumType id="AddCause">
<EnumVal ord="0">Unknown</EnumVal>
<EnumVal ord="1">Not-supported</EnumVal>
<EnumVal ord="2">Blocked-by-switching-hierarchy</EnumVal>
<EnumVal ord="3">Select-failed</EnumVal>
<EnumVal ord="4">Invalid-position</EnumVal>
<EnumVal ord="5">Position-reached</EnumVal>
<EnumVal ord="6">Parameter-change-in-execution</EnumVal>
<EnumVal ord="7">Step-limit</EnumVal>
<EnumVal ord="8">Blocked-by-Mode</EnumVal>
<EnumVal ord="9">Blocked-by-process</EnumVal>
<EnumVal ord="10">Blocked-by-interlocking</EnumVal>
<EnumVal ord="11">Blocked-by-synchrocheck</EnumVal>
<EnumVal ord="12">Command-already-in-execution</EnumVal>
<EnumVal ord="13">Blocked-by-health</EnumVal>
<EnumVal ord="14">1-of-n-control</EnumVal>
<EnumVal ord="15">Abortion-by-cancel</EnumVal>
<EnumVal ord="16">Time-limit-over</EnumVal>
<EnumVal ord="17">Abortion-by-trip</EnumVal>
<EnumVal ord="18">Object-not-selected</EnumVal>
<EnumVal ord="19">Object-already-selected</EnumVal>
<EnumVal ord="20">No-access-authority</EnumVal>
<EnumVal ord="21">Ended-with-overshoot</EnumVal>
<EnumVal ord="22">Abortion-due-to-deviation</EnumVal>
<EnumVal ord="23">Abortion-by-communication-loss </EnumVal>
<EnumVal ord="24">Blocked-by-command</EnumVal>
<EnumVal ord="25">None</EnumVal>
<EnumVal ord="26">Inconsistent-parameters</EnumVal>
<EnumVal ord="27">Locked-by-other-client</EnumVal>
</EnumType>
24 Oct 11 final proposal

 

Privacy | Contact | Disclaimer