1121   Ed2: integrity or GI report can not be interrupted by change of a value

Created: 06 May 2013

Status: Triage

Part: Part 10 (2005)

Links:

Page: 30,32

Clause: 6.2.4.13, 6.2.4.14

Paragraph: Unbuffered reporting model, Buffered reporting mo

Category: Issue for edition 2 of this part

Issue

test case sRp5 and sBr5 about Segmentation of reports:
"Verify that an update of a data value during sending of a segmented report caused by an integrity or general - interrogation trigger can be interrupted by a report with change of one of the data values with a new sequence number. (IEC61850-7-2 Subclause 17.2.3.2.3.5)".

while in 7-2 17.2.3.2.3.5, "If – while sending these reports or subreports respectively – values of data objects caused by data-change , quality - change , or data-update need to be sent, this shall be done with a new report sent after the transmission of the integrity or general-interrogation report. "

Proposal

So here the test case description should be "Verify that an update of a data value during sending of a segmented report caused by an integrity or general - interrogation trigger can not be interrupted by a report with change of one of the data values with a new sequence number. (IEC61850-7-2 Subclause 17.2.3.2.3.5)"

Discussion Created Status
1. in server ed1/ed2 testing procedure Rp5/sRp5 and Br5/sBr5 are described differently in "detailed test procedure" section, the point of "segmented integrity/GI report can be interrupted by dchg/qchg/dupd" is not even mentioned;
2. proposal is suggested to be updated into Part10 and also testing procedure "detailed test procedure" section.
23 Dec 15 Triage

 

Privacy | Contact | Disclaimer

Tissue DB v. 22.10.13.1